jmshort Posted June 18, 2014 Share Posted June 18, 2014 I just purchased the Amplifi 150 and cannot connect any of my Bluetooth devices IOS or otherwise. When I turn the amp on and off the Bluetooth light briefly comes on, but holding down the button for the 2-3 seconds (or 30 seconds for that matter) to enter pairing mode does nothing. The light doesn't come on at all other than when the entire amp is turned on or off, nor can any of my devices communicate with the amp regardless. I like the amp alright even without the app or Bluetooth functionality at all, but I bought it primarily for the apps modeling capability. Is there any way to fix the problem short of sending the amp back to the factory? Quote Link to comment Share on other sites More sharing options...
Triryche Posted June 18, 2014 Share Posted June 18, 2014 Just for clarification, are you attempting to discover AMPLIFi form you iOS or other BT device? Quote Link to comment Share on other sites More sharing options...
jmshort Posted June 19, 2014 Author Share Posted June 19, 2014 I've tried with both my apple devices as well as other Bluetooth devices. Quote Link to comment Share on other sites More sharing options...
Triryche Posted June 19, 2014 Share Posted June 19, 2014 So with an iOS device, in settings, under BT, does it "see" the AMPLIFi? Quote Link to comment Share on other sites More sharing options...
jmshort Posted June 19, 2014 Author Share Posted June 19, 2014 It does not. My Amplifi has yet to actually enter pairing mode at all. I still attempted to find it on my devices to no avail. It seems that the Bluetooth button is wired up correctly because I have since noticed that not only does the button light when powering on or off but if it is pressed after the other lights fade, they brighten up. So there is recognition that the Bluetooth button has been pressed. Quote Link to comment Share on other sites More sharing options...
Triryche Posted June 19, 2014 Share Posted June 19, 2014 I know you probably did all this already, but just on the off chance a simple detail was missed, here is a vid from the KB. If you purchased it locally, I would definitely exchange it. At this point I would contact Line6, give them a call or open a support ticket. http://line6.com/company/contact/ Quote Link to comment Share on other sites More sharing options...
jmshort Posted June 20, 2014 Author Share Posted June 20, 2014 Yeah, I've checked out the video already and scanned all the other forum threads. I'll definitely contact Line6 and see where that goes. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
Triryche Posted June 20, 2014 Share Posted June 20, 2014 Are you still in the exchange window (if you purchased locally)? Might be quicker/easier. Quote Link to comment Share on other sites More sharing options...
Viper7491 Posted April 29, 2015 Share Posted April 29, 2015 Passcode for Bluetooth amplify 150 for ps3? Quote Link to comment Share on other sites More sharing options...
Triryche Posted April 29, 2015 Share Posted April 29, 2015 Try 1234 or 0000 Quote Link to comment Share on other sites More sharing options...
Provopro Posted June 11, 2018 Share Posted June 11, 2018 Shows up and links in iPad, as Amplifi Nothing shows up on android s8 phone Quote Link to comment Share on other sites More sharing options...
bsewart Posted June 11, 2018 Share Posted June 11, 2018 Is the firmware updated to latest? Android needs later firmware to be o the Amplifi. It may fix the OP's issue as well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.