Death_Trap Posted June 24, 2014 Share Posted June 24, 2014 Hello!When I open Vyzex Floor POD Plus it sends an error that says : AutoSense could not find the Line 6 Floor POD Plus. And when i try to manually set up my MIDI Interface cable it starts to receive the Line 6 Floor POD Plus Channel, but it stops when it reaches 70-80 bytes. I try to make some loops to receive more bytes, but it moves to receiving the banks. And there i have the same problem. It receives to maximum 120 bytes and when i make the loops it sends a message : ERROR! SysX data is missing bytes! After i click on cancel to proceed to the editor it goes crazy and goes randomly from bank to bank and it won't let me control it. I am using this cable : .Please help!Thanks! Quote Link to comment Share on other sites More sharing options...
BillBee Posted June 24, 2014 Share Posted June 24, 2014 Its the midi cable cable 9/10. The cheapo chinese ones usually do not reliably work. Try the MAudio Uno midi/usb cable. If you do a forum search you will find lots of problems with midi/usb cables, with the common fault being the cheap ones. -B 1 Quote Link to comment Share on other sites More sharing options...
Death_Trap Posted June 24, 2014 Author Share Posted June 24, 2014 I don't think that the problem comes from the cable, because when i double click on one of the banks on the computer it loads the bank on the processor. But the software is still going crazy, making random moves. Quote Link to comment Share on other sites More sharing options...
BillBee Posted June 24, 2014 Share Posted June 24, 2014 Well if you "are sure" the cable is fine ;-) Here are some Pod posts that go over similar problems with the midi/usb thing: http://line6.com/support/topic/3492-problem-to-connect-the-pod-20-with-a-midi-usb-device/ http://line6.com/support/topic/4814-problem-connecting-pod-20-with-usb2midi-cable/ http://line6.com/support/topic/6127-pod-20-comunication-with-pc/ Go ahead and read those. You will have to check how the cables are connected in->out and out->in. See if your OS is seeing the cables because if Vyzex isn't then it could be a config issue either in the program or your computer. Didn't Vyzex have a pretty decent help file? Honestly I am not the patron saint of MAudio but they have solved similar issues like yours. Good Luck! B Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.