Jump to content
Sign in to follow this  
Monter

Noisy Echo Park

Recommended Posts

Hi

 

I love this pedal but as soon as I connect it into a chain with other pedals it generates a hideous sweeping noise which swishes in time with the delay light. I am using a Dunlop Power Brick to supply the power, so I am thinking the problem cannot be with that, yet if I power the Echo Park in isolation... It works fine. So what to do? Hoping someone out there has the answer

 

Regards

Share this post


Link to post
Share on other sites

The DC Brick is causing the problem. The ToneCore pedals are notorious for being noisy on daisy chain power supplies, and even though the DC Brick isn't a literal daisy chain like, say, the Visual Sound One Spot, it still is for all intents and purposes a daisy chain. What I mean by that is that its output aren't electrically isolated from one another. They are just wired in parallel with each other. If you have an actual isolated power supply, like the Voodoo Lab Pedal Power 2 Plus, than each output is isolated. It's like having a bunch of standalone power supplies. There's no crosstalk between the outputs.

Share this post


Link to post
Share on other sites

I use a rechargeable battery pack that I made with 8 Rechargeable D Cell batteries, a battery holder and cable. It has 10 Ah. Works great and I can even daisy a few pedals with it 'cause it lasts for days of playing.

Share this post


Link to post
Share on other sites

Well that is what I suspected, thanks a lot for taking the time to reply and making my mind up!!

Share this post


Link to post
Share on other sites

One other option that I forgot about until just now is to pick up one of these little DC isolator things.

 

http://www.jrrshop.com/diagops09

 

You could put it between the output of the DC Brick and the Echo Park, and it should prevent that noise you're hearing.

Share this post


Link to post
Share on other sites

I have a problem like this too, I use a daisy chain and its the echo park causing a really fast clicking noise, sort of like static... Could it be a patch cable issue? or something else

Share this post


Link to post
Share on other sites

I have a problem like this too, I use a daisy chain and its the echo park causing a really fast clicking noise, sort of like static... Could it be a patch cable issue? or something else

 

It's the daisy chain power supply. In order to operate quietly, the ToneCore pedals need to have an isolated power supply. That means either using a standalone supply for the pedal or getting a power supply that has electrically isolated outputs - something like the Voodoo Lab PP2+. You can also buy the little inline isolators. For one pedal, that's probably the most inexpensive solution. But at $25 a piece, that would add up.

Share this post


Link to post
Share on other sites

I use a One Spot on my board and it works great. But, I only have around 5 pedals at a time running so YMMV.

Share this post


Link to post
Share on other sites
On 3/29/2015 at 6:55 AM, euanchan said:

I have a problem like this too, I use a daisy chain and its the echo park causing a really fast clicking noise, sort of like static... Could it be a patch cable issue? or something else

 

Sorry to necro this thread, but I just started getting this same fast clicking noise from my Echo Park, but it only happens when I'm running stereo. I have tried using it with my DC Brick and with a stand alone power supply. Same issue. I even pulled the Echo Park off my board, ran my guitar directly into it, and stereo out to two amps with no other pedals and powered it with a dedicated supply and got the same clicking noise. 

 

Any suggestions?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...