mrspeta Posted July 5, 2014 Share Posted July 5, 2014 Don't know why, but my Spider IV 75 keeps showing me EQ settings on my screen and I can't remove it. It's really annoying, because i can't navigate to anything else. Please help Quote Link to comment Share on other sites More sharing options...
jak_E_lee Posted July 5, 2014 Share Posted July 5, 2014 Seems to me theres an issue with one of the eq pots. Try a master reset on the amp.hope that helps 1 Quote Link to comment Share on other sites More sharing options...
gettothechorus Posted July 5, 2014 Share Posted July 5, 2014 I'm starting to have the exact same issues today too. It's never happened before. I too have the upgraded firmware. It's a little hotter in my apt today but it would be no different of an environment than if I was at a club with this amp. I have too many custom tones to want to try a master reset. Is there some kind of patch fix for this? Quote Link to comment Share on other sites More sharing options...
jak_E_lee Posted July 6, 2014 Share Posted July 6, 2014 with the amp off,try moving all the pots on the amp full left to full right and then turn the amp on. I had this issue once and that cured it 1 Quote Link to comment Share on other sites More sharing options...
gettothechorus Posted July 6, 2014 Share Posted July 6, 2014 Dang Jak.... That did cure it. :D Thanks for the tip. I don't play this amp as much as my Spider Valve MkII Boghner, but I want to start bringing in a smaller set up for some other gigs. Thanks again!! Quote Link to comment Share on other sites More sharing options...
jak_E_lee Posted July 6, 2014 Share Posted July 6, 2014 full points to me,lol. I think the pots get a little sticky from time to time in turn,that makes the screen freeze up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.