efxtr Posted July 6, 2014 Share Posted July 6, 2014 After updating to new firmware (1.01) and app (1.2), fbv express changes preset to A, B, C, D of only bank 1. Whenever I try to change preset via ios app (ie bank 3, preset B ), tone changes accordingly but when I use fbv express to change the preset after selecting the bank with ios app (let's say preset C of current bank) it automatically loads preset (ie C or which button you pressed) of bank 1. So, Selecting Bank 3 - Tone B via ios app -> amplifi loads the tone properly -> Push the button C of fbv express mkii -> ios app and amplifi loads the Bank 1 - Tone C instead of Bank 3 - Tone C So, currently I can use fbv express mkII only with first bank, limited with 4 presets. Anyone with same experience? Quote Link to comment Share on other sites More sharing options...
pob41 Posted July 6, 2014 Share Posted July 6, 2014 Yes, that's how mine is working too. Any solutions? Quote Link to comment Share on other sites More sharing options...
marcoslupo Posted July 9, 2014 Share Posted July 9, 2014 Yep same here, would like to understand if the Express MkII will carry more functionality with the new App and amp firmware (as intimated towards in the Amplifi Remote update notes on the App Store). Quote Link to comment Share on other sites More sharing options...
efxtr Posted July 9, 2014 Author Share Posted July 9, 2014 Let's make Line 6 hear us better via their ideascale site. Better integration with FBV Express mkIIhttp://line6.ideascale.com/a/dtd/Better-integration-with-FBV-Express-mkII/640195-23508 3 Quote Link to comment Share on other sites More sharing options...
rodrigocmn Posted July 11, 2014 Share Posted July 11, 2014 Better integration is definitely a priority! I've just contributed with my vote! Quote Link to comment Share on other sites More sharing options...
efxtr Posted July 11, 2014 Author Share Posted July 11, 2014 Better integration is definitely a priority! I've just contributed with my vote! Thanks a lot Quote Link to comment Share on other sites More sharing options...
efxtr Posted July 22, 2014 Author Share Posted July 22, 2014 Dear all, I opened a ticket and just be informed by a support team member as below. I asked about future firmware update for this issue and I'll inform you as soon as I get the answer. Quote: ....this is a current limitation of the AMPLIFi Remote app and FBV controller integration. When the AMPLIFi Remote app is in use, it will be responsible for changing presets and banks outside of presets 1A, 1B, 1C, and 1D which are assigned to the FBV Express MKII footswitches. Therefore presets locations 1A, 1B, 1C, and 1D will always be assigned to the footswitches on your FBV Express MKII and the remaining preset locations will only be accessible from the AMPLIFi Remote app. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.