kdnulisch Posted August 25, 2014 Share Posted August 25, 2014 Everything seems to be ok. Fuse on outside is fine, took out the mother board and the two fuses on there are not blown. Preamp tubes dimly light up. Is there something else it could be or do I just need to replace all the tubes? I do not gig, really do not use this amp much and probably had not had it on for 4-6 months. It was fine a few days ago, then turned it on today and got this problem.....I did not hear any type of pop when I turned it on. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
napynap Posted August 26, 2014 Share Posted August 26, 2014 Eliminate outside issues by disconnecting FBV pedal if you have one, and try a different cable and guitar if possible. Quote Link to comment Share on other sites More sharing options...
kdnulisch Posted August 26, 2014 Author Share Posted August 26, 2014 OK, thanks. I do not have a foot pedal. Also, I hooked the guitar/cable to another amp to make sure it was fine....then moved both to this amp with no change. Quote Link to comment Share on other sites More sharing options...
gbatving Posted September 15, 2014 Share Posted September 15, 2014 Having same issue all of a sudden but new tubes about 3 months old.... Did u ever get a resolution? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.