POD HD500 Awful sound after updating to Flash Memory v.2.32

[Jerkon 6]

Today I did the update of Flash Memory v2.10 to v2.32 and the sound of POD HD 500 has changed a lot and became very bad.
After the update, I did the "Global Reseting" then recalibrated the pedal and did the restoration of my "Bundle"

So when I connected the POD HD500 into an amp, I realized that the sound was horrible, very acute and with no required modulations, including the preset sounds.

So what do I do?
Rollback the Flash Memory v2.10 or what?

[brue58ski 645]

Have you checked to see if the global output is the same as before? i.e. Studio direct, combo, etc.

[Jerkon 6]

I normally use Studio Direct and I not checked this.

[bvaladez74 36]

Revert back to the prior version.  You don't have to move up...especially if the bug fixes don't apply to you.

[joel_brown 367]

Also check your input Impedance setting.

[Crusty_Old_Rocker 2,556]

You'll most likely find that it's the input and output settings.  Just double check them.

 

Cheers,

 

Crusty