These forums are read only, please use our new forums here.

Main :: Spider Jam

Spider Jam static noise
by pilotds on 2009-11-25 12:58:15.4510

Hello.  I bought my Line 6 spider jam about 1.5 years ago and hardly used it.  I am starting to get back into now and find that when I turn the unit on there is a high amount of static noise coming from the amp with no guitar sounds being amplified.  I tried turning down the mic input to below -5 and it made the static go down a little bit but still no guitar sound is coming through.  I don't think that I purchased the extended warranty from Guitar Center but like I said the amp was used very little and was definitely not dropped or banged around at all.

Please advise if I can resolve this issue through Line 6 directly without paying extra money on top of the price that I already paid for the amp.



RE: Spider Jam static noise
by AParedes on 2009-11-25 14:35:12.9970


I have created a support ticket for you regarding this situation. A support ticket allows you to directly correspond with a Line 6 Support Representative. An email will be sent to you from Line 6 containing a link if a Line 6 support representative determines that a ticket is necessary to troubleshoot your issue. Please follow the link in the email to view your open ticket to work one on one with Line 6 Support.

Re: RE: Spider Jam static noise
by Guitar6Line6 on 2012-08-02 18:15:43.6690

Hello- I have the same problem out of nowhere. Bought the amp a year ago. Used about 30 times. Last use it worked great and turned off. Week later I turned it on and static noise when nothing is plugged in and tried different outlets (but it worked fine the whole year in the same spot(plug) .  Tried the factory reset I saw other posts <hold A and turn on>  .   Can you assist me please so I can play again?  Thank you- Rob

Re: RE: Spider Jam static noise
by daydreamin7677 on 2012-08-03 10:52:39.2290

Make sure your MIC Level Knob is all the way down. Its the shinney knob on the far left of the amp.

The information above may not be current, and you should direct questions to the current forum or review the manual.