These forums are read only, please use our new forums here.

Main :: POD 2.0, PODxt Family, Pocket POD, FloorPODs

Pod xt live
by metal5150 on 2013-01-02 06:12:20.5810

I want to reload my factory settings on my Pod xt live. I have metal shop pack installed. Will this reload delete my metal shop ??

Re: Pod xt live
by Triryche on 2013-01-02 07:01:10.4120

Not at all.

You will want the newest drivers and Monkey.

The newest Monkey includes the Line6 License Manager which will allow you to authorize the metal Shop.


See Zaps response.

Message was edited by: Triryche to include warning.

Re: Pod xt live
by TheRealZap on 2013-01-02 07:42:36.5590

tri assumes that you bought the metal pack....

if you bought the xt live with the metal pack already on it from ebay or whatever... you WILL lose that...

Re: Pod xt live
by Triryche on 2013-01-02 08:06:51.7680

Nice catch Zap!!

And could very well be the case seeing how recent Metal5150 created an account.

If it is 2nd hand and you did not purchase the Add-on yourself, you may be able to get the seller to "gift" it to you.">">

Re: Pod xt live
by metal5150 on 2013-01-03 17:48:42.1150

Yes i did purchased this uint from ebay. The junkie pack was already installed. I purchased the metal shop from the line 6 website. I noticed a couple of patchs have been altered. If i had a list patchs with all there settings i would tweak them without reloading them.

Re: Pod xt live
by Triryche on 2013-01-04 06:00:32.6340

If you purchased the Metal Shop you should be OK, the FX Junkie is standard on the xt Live.

You can also save all your patches as a bundle with GearBox or Monkey.

Re: Pod xt live
by metal5150 on 2013-01-04 06:12:49.7580

Thanks for your help. I am newbie to the pod xt live, But i am slowly figuring out all the ins and outs of this unit.

Re: Pod xt live
by Triryche on 2013-01-04 06:30:08.8120

No problem, we do enjoy helping out.

I don't have the live, but I do have the PODxt, there are some nice tones to be had.

Are you mainly using it for live, recording, or both?

The information above may not be current, and you should direct questions to the current forum or review the manual.