These forums are read only, please use our new forums here.

Main :: Relay Digital Wireless

Botched TBP06 Update - Bricked?
by JazzMac251 on 2013-02-09 19:51:25.7280

I've been having dropout problems with my G30 since I got it. Finally decided to sit down and try to resolve the issue. I was having trouble getting the transmitter to connect to the XD-V75 reliably, but eventually a strong enough connection was established such that the update started uploading to the transmitter pack automatically. The Audio light turned from solid amber/yellow to flickering red. A couple seconds in, however, the update failed and the process would not restart itself. Now the transmitter pack will only turn on with solid amber and purple lights and does not seem to respond to commands to change modes. I tried moving the channel selection slider to get the unit back into download mode, but doing so produced no results. It simply continues displaying purple and amber solid lights. I tried removing the batteries, but, again, no change.

The transmitter is bricked, isn't it? >:\

Re: Botched TBP06 Update - Bricked?
by sdevino on 2013-02-11 14:46:18.2570

Hi JazzMac. It sounds like you unit is stuck in loader mode. So we recommend you power the unit up and try running Monkey again. Since it is already in loader mode you do not have to do the initial setup steps to get it into loader mode.

Please let us know if that works.



Re: Botched TBP06 Update - Bricked?
by JazzMac251 on 2013-02-11 21:18:43.5870

Thanks for the reply!

Correct me if I'm wrong, but isn't loader mode a solid amber light only? That's what I was seeing when it was in loader mode before. My TBP06 is showing solid amber and purple lights.

I tried to reconnect with Monkey to restart the upgrade process, but the XD-V75 won't connect with the transmitter. I tried to update via the G30 1.0 firmware upgrade method, but that didn't work either. A dialog box pops up that says "please select device", but that's about it. 

Re: Botched TBP06 Update - Bricked?
by sdevino on 2013-02-12 11:39:01.9190

Yes it should be solid green. Please contact customer support and arrange for a repair.

Thanks and sorry for the inconvenience.

The information above may not be current, and you should direct questions to the current forum or review the manual.