Valis11

I hope there is a new update, hopefully with an orange amp model, diezel vh4 model or peavy 5150 model or something, of course with matching cabs. And with perhaps a ts9 tube screamer, more deep EQ capabilities. also it would be very interesting if they could perhaps make the chain signal, well, adjustable as opposed to fixed, e.g. run what you like, but still only limit it to four things in the chain....yes, I am a very hopefully and idealistic HD300 user :D

Thanks for your reply! Oh don't worry I have no illusions about what it would sound like :) I'm really just wanting to know so i can experiment a little and also for versatility, and if I'm honest, for convenience; usually when I play a gig and just opening for bands, the other bands will bring amps and let us use them if theyre generous. I'm not too fussy when it comes to tone, I can pretty much play through anything. If not, then I usually just go through FOH/PA and use floor monitors as well. But I just figured I'd like to experiment with the POD a little more with amps. Just one more question so that I understand how the POD interacts with the power amp of the combo/stack: Once I have bypassed the pre-amp on the combo/stack, will the settings on the front of the combo/stack regulate the tone and/or output volume, or will the tone and/or output volume be completely regulated by the POD? I'm thinking that it is the latter. But I thought I'd ask just to be sure. I do know that the power amp depending on what it is will affect the tone a little, as well as the speaker of the stack or combo pushing the air. Thanks for the advice and help again! Chris

thanks for your help! Just to be sure, do I go from the left/mono UNBALANCED output of the pod 300 to the fx return of the amp? thanks again chris

Hi If anyone can help with this I would appreciate it. More specifically, what I want to do is to go from my POD HD300, bypass the pre-amp on the tube amp. What I also already know is that in order to get decent tone from this method I need to select the amp model as PRE-AMP on the pod, set output mode to LIVE and set the output mode on the pod to ComboAmp or StackAmp. I usually play a Stack with 4x12 marshall cab, but sometimes a combo. I know HD300 has the ability to disable cab models now, so I would like to try this out so that I use only the PRE-AMP of the HD model along with the effects i.e. Screamer, EQ etc. and w/out Cab modelling to colour the tone coming out of the speaker, and only the POWER AMP of the Combo/Stack (Assuming the amp has an FX Return of course). But Im just a little confused as to how I explicitly go about doing this. For instance, HD300 does not have an FX loop....so what do I do? What are my options? If someone could provide me with possible signal chains for HD300, like exactly which inputs and outputs I need to use and what I have to consider when it comes to volume/tone/signal chain because of having no FX loop on the pod. I'm told that I may need a dummy plug because there is no FX loop on HD300? is this correct? Thanks for your time Chris