krasnikpl

Now it is well . thx

I'll try to do it at home . Thank you very much

"selecting the tuner" = look for this setting . I do not remember where it is .

Hi!After using dry patch (new tone) in HD 500 and conecting with Amplitube sound deformation is getting smaller but I can still notice(hear) kind of reverb.What I should change in new tone patch to make HD 500 not to interfering with Amplitube and working in the mode "bypass"Thanks for you time

"""In Amplitube you have to choose the POD HD500 ASIO Driver. IF you only want to hear amplitube and not the POD in LINE 6 devices in the monitor TAB, move the volume slider all the way to the left. Now you will only hear amplitube presets. Hi I have done what you recommended and...It worrked a bit. POD HD 500 is silenced but preset from POD 500 disturbing sound of preset from Amplitude.Can u help with this problem please Now remember as long as you USB is connected you will not hear POD HD unless you move that slider back to the right or in case you using a DAW you can activate the monitor on the audio track."""

ok .. thx

Rozumiem ... Dziękuję za pomoc . :-)

Thank you very much for your answer.But what I need know is how to change preset from one to another up/down while PC is contected via Usb port.I have to add I do not have MIDI connection.Thank u for you time and help

Ok thx What must be done to change preseted settings in soft Amplitube 3 ?

" Perhaps he means how can you use an HD500 to control Amplitube 3? " = YES !

Hello.What must be done to change preseted settings in soft Amplitube 3. Mentioned software was installed on PC with W7 OS with help of device called Line 6 POD HD 500.I will be gratefull for your help.Thanks in advance

Welcome What must be set , that POD HD 500 steered Amplitube 3 . ( Sorry for my English )