filippou2

Dear guys, i play guitar in a street band using the line6 g30 to trasmit the signal to an external mixer, this is my gear: guitar->zoom mg50(attached to the shoulder strap of guitar)->g30. i have a lot of problem, the signal is very disturbed, with interruptions of even seconds even though I am 1 meter away from the base of the line6. The bass man, who play bass without effect and with G30, doesn’t have any problem. Do you things that the zoom multi effect give me any problem?

Mmm..try to supposed this (true situation): When i'll press FS1 The pod send a midi input to my ampli (to have crunch channel) and FS1 turn on a digital delay.. When i'll press FS2 pod send a midi input to my ampli to have clean channel and The turning on off a modulation delay.. If I want to pass from FS1 to FS2 i have to turn off The delay of The FS1 and so i have to press more on one bottom ....or there's a faster solution?

Ok guys..the midi section is functionally! But in FS5-8 there's a "contradictory" situation.. for example: If i have to pass from a sound with flanger and delay to a sound without these effects but with tremolo: i have to press two button to turn off flanger and delay and one to turn on tremolo...but i have bought a multieffect pedalboard to avoid to do "tip tap" with single pedal... How is it possible that in FS5-8 I can't automatically turn off some effect and turn on one effect with only one press of buttons!?!? The solution is ABCD mode, but to change preset there's the 40 ms of silence between the presets....

Inverting the order change this possibility...omg it's more difficult of monkey island :D

Ok guys thank's a lot, it's a good solutions.. But i'm not able to do this things: I have a digital delay always on and an analog delay off..when i'll press fs4 i'd like to turn on Analog delay and tun off the digital delay...can it be possible?because i'm not succeeding :(

You're right .. But The manual is not always clear ( for me)..tomorrow i'll write you The responce :)

OKK thank's so much... I'm trying now....but I have a nooby question: If I set an effect control of the patch 1B in FS5 to activate tremolo (for example) the pod change into preset 1A...how can I activate the fs control (from fs5 to fs8) without change patch??

Mmm..sorry for my poor english but...what's spacealt's thunder?? 😅

mmm...and so with 1A preset (for example) i can configure a different midi signal for FS1 or FS2?

mmmmm.... The problem is that my pod (via midi) also control the channel of my head (H&K tubemeister 36)...for example 1A: Clean channel of AMP + some effects of pod 2A: Distortion of AMP + some effects of pod etc... And so i need to change preset every time :wacko:

Thank's for the answer! How can I minimeze this? :( I use to play pod in a loop of my head (H&K tubemeister)

Hello to every body! I have a POD HD500X from november,i have a problem but i don't know if it's a problem of pod or a characteristics of them. When I change a patch (also factory preset) i hear a 40ms of latency (for latency i mean a totally mute sound). The attach file is a mp3 of this situation when i press the same preset more times... What do you thing?