kingdoublecut

Ok...finally figured it out with content from another post. Reorder FX in Librarian as you wish. Use the Preset Mode Switching per pg 5 of manual - press/release both on & Tap/Flux switched and there is your reordered list. Definitely get a two button extension switch to scroll thru your FX list. I use the Ampero switch. Must use a TRS cable. I'll be keeping the HX One!

So if I reorder the 127 FX that show in Librarian, can I transfer that exact list in whole to the pedal? I don't want FX categories...all I want are the dozen or so FX that I chose so that when I turn the pedal on, there they are in that order and I can use my two button extension switch to scroll thru them. If HX One can't do this...I have zero use for it. Seems if this is meant for guys like me with "normal" pedal boards, that should have been the first item in their design brief when they were creating this pedal. Not asking too mush am I?

OK - yes standard 4CM works as it should. Found that the realo problem was I didn't have enough power fed to it from my Cioks DC7 - caused a popping/fluttering sound. Thanks for the input phil_m and rd2rk!

Just bought the HX Stomp to replace the delay/modulation half of my pedal board. I run my drives and pitch shifting into the front, delays/mods to the FX loop. Easy enough using an American Looper 4 input/output patch bay box. When Line 6 says 4CM compatible, it sold me on the Stomp. Well L6 4CM is not the same as my 4CM. Can anyone clarify whether I can run the Stomp only into the amps fx loop (and whether I need to add the FX Loop block to each patch to do so) or not. I am going to sell it if it doesn't do what I want. It may be the HX Effects is what I should have bought, but the ability to use the Stomp as my entire rig if my amp went down was a nice perk... I would appreciate any info you can share.