booker_ch

Hello I have an Hx Effects on my pedal board, actual with a cheap volume pedal made of plastic. I wanted to exchange it against something more stable and bought the Mission Engineering EP1-L6-BK. Connected with a standard stereo cable it's working for nothing (0%) or full volume (100%) as soon as I lift it a little bit from the "0" position I have already full volume. Did also try it on the Hx effects only without the other effects and programmed a new file in the Hx effects with the volume button only after I did the learn progress. I have no idea what else I can do - any hints ? best Peter

Hello I have a Hx Effects on my pedalboard where I wanted to replace an older plastic volume pedal with a Mission Engineering Expression Pedal, the Mission Engineering EP1-L6-BK. Did connect it but it‘s not really working, there is nothing between 0% or 100%. As soon as ai release a bit from 0% it goes to 100%. Did try different settings and also connected it directly to the Hx Effects. It‘s connected by an oridnary stereo cable. Any advice ?

Thanks rd2rk but isn‘t this just inserting via the fxloop ? I‘m interested in the 4CM

I have the Nux since a few days and played first with Hx Effects just in the effect loop of the Nux which works fine. Now I try to connect it with the 4 cable method. I'm a bit confused because the Nux as well as the Hx effects have an Fx Send/ret. Should both of them be activated ? So far I got some sounds but overlayed with a terrible noise, this might come from my cheap cables. Need to probably replace them. A Behringer Hum Destroyer helps a little bit, but there is still the noise on it. Thanks for any advice