JLE888

Hello. I just got an HX One. I wanted to use it for instant and momentary Whammy fx using the Flux Footswitch. It appears that there is no way to change it from latching to momentary? That’s unfortunate as it really slows down the use of the Whammy effect. Has there been any talk of adding this feature in the future? Basically it needs to shift up when pressed and return to heel pitch when released without latching. I really hope they add this feature as this pedal would then crush any of the EHX or Digitech offerings.

Hello. I just got an HX One. I wanted to use it for instant and momentary Whammy fx using the Flux Footswitch. It appears that there is no way to change it from latching to momentary? That’s unfortunate as it really slows down the use of the Whammy effect. Has there been any talk of adding this feature in the future? Basically it needs to shift up when pressed and return to heel pitch when released.

Did not know that, that's a cool feature, thanks. I plugged in a MIDI cable and went to the MIDI implementation page. I was able to get the footswitch to respond by setting it to CC toggle and changing the according CC #. I got it to turn on/off the actual block itself, but couldn't figure out how to get it change specific parameters of fx. Could you possibly help me program these specific things mentioned below? I would like FS6 and FS7 to be programmed to control delay parameters. I would like FS6 to toggle the delay subdivision from the dotted 8ths I normally have it set at to 1/4 notes. Also would like FS7 to be programmed to increase delay repeats when pressed. I couldn't find the corresponding CC numbers for these parameters anywhere in the manuals. thanks in advance for the help!

I’m using the HD500x in pedalboard mode and I toggle between two amp models on one footswitch. I have all blocks used in my patch but have two unused footswitches. It kinda bothers me that they are unused. Is there anything else I can assign them to, like parameters or can they only be assigned to blocks? Heres the fx blocks I use: Particle verb Analog delay w/mod Reverse Delay Pitch Vibrato Pitch Glide Vol 1 Vol 2 Wah (expression pedal) The Wah obv uses the toe switch of exp pedal and the volume pedals are assigned to the same footswitch to toggle between amps. This leaves me with two unused switches. Thanks!