robbmelancon

Ah, I get it now. Not very intuitive but I understand what's happening now. I was expecting it switch the PC+ to "Brown", not to edit whatever speaker it was on to "Brown". Thanks

Here's the patch, thanks AC30 WT 112.hlx

I have a Helix floor connected to a Powercab 112 plus with an AES cable in the L6/AES connection. My helix is set to digital output and the patch under the Powercab settings is set to speaker "Brown". When switching to the patch, it is not setting the Powercab to the "Brown" speaker. The Powercab stays on whatever speaker is selected and it changes the speacker patch on the Powercab to <Edited>. I can't tell what parameter has been changed on the Powercab but I can switch speakers and then again switch to the patch on the helix, it's not changing to the speaker set in the Helix patch and just puts whatever speaker is selected on the Powercab to an <Edited> state. Helix and Powercab both set midi channel 1. It's a new AES cable in the AES/L6 output and input respectively. Am I not understanding how its supposed to work? Any ideas or things I need to check? Thanks in advance.

Can someone explain why/when Poly Sustain effect is disabled? I am trying to use it in existing presets and the only way I can add it is if I delete almost all of the other blocks in the preset. Using with Helix floor. Thanks

I restored the Global Settings and also all my IRs and that fixed it. Thanks for the tip.

So first question, how do I go back to the previous version? Second question, does anyone else have problems with 3.0 where almost all of my patches are now clipping and seems like they have way too much gain? I turned on global input pad and that didn't fix it.