bshilkitus

Thanks, I will tonight.

Hmm, https://www.amazon.com/Hosa-GPP-290-TRS-TS-Adaptor/dp/B000068O4M?gQT=1

Well, actually not.

Sorry to cause you distress at 3AM! So here is my situation. I play for a large church every Sunday. They have a stereo sound system. My rig is as follows: GUITAR - TUNER - KOT - TUMNUS - TIMELINE - BIGSKY - HX STOMP - DUAL SHOWMAN (on stage) I thought it would be nice to send a stereo signal to the board so the sound guy could pan my ambient delays and reverbs (which come from the Strymons) left and right so the congregation could hear the effect. I now believe the only way to do it is to insert a "stereo send" on the stomp before the path split. Put an AMP model on paths A and B after the split and send that to the board via the main LR outputs. Then from the send jack, I would need a TRS cable to an external mono sum adapter, then to my Showman via standard instrument cable. I realize all this could be solved by putting the Strymons after the STOMP or using the stomps effects instead after the models. But I love the Strymons were they are. So, not worth it. They can imagine. Thanks for your help.

Yes, tried that. The main L/R outputs then are in mono.

I maintain the stereo field out of the main LRs if I place a "stereo send" before the models instead of a "Send L" to send to my stage amp, but then I only get left channel coming out of my amp because the amp does not have stereo input jack. This is crazy.

OK, this works. Getting the stereo delay from my flashback on both L and R outputs. (FOH) Then when I wanna create a send for my stage amp (pre model) like this......... then I lose my stereo signal and it comes out in mono. FYI, I am using a Ping Pong delay panned hard L/R).

OK, gonna try it again. Gonna just use a Flashback delay and go into the L/R Input on the stomp and play with it. I will post some screen shots. So thankful for your help!

I see. I think the problem is that my stereo effects (Timeline and Bigsky) are pre HX Stomp. Even though they are running into the HX Stomp in stereo, I guessed it is summed right from the beginning? IDK. See below And I am.

Oh, the amp model on path A sums the L/R to mono.

OK, I thought I tried that but I will give it another shot.....maybe tomorrow. Thank you!!

Yeah, tried that. It still summed the stereo to mono. Thanks though!

That is exactly what I am doing. Thank you very much for your thorough and well thought out response! I guess I will need two HX stomps! HA!

Thank you for your response, but I still can't get a stereo image from the main L/R outs. The amp model sums the two channels into mono.

Hours and hours of searching but I can't figure this out. It seems like it would be a common setup. I want to...... Run a stereo signal out of my HX Stomp with an amp model to the FOH, and a mono signal to my amp on stage without modeling. My signal chain is TUNER - TUMNUS - KING OF TONE - TIMELINE- BIGSKY - HX STOMP. Currently I have the SEND L/R going to the FOH but its a mono signal, because as soon as I put a amp model in the sidechain (path b) , it sums the stereo signal. And I need path A for my stage amp without modeling. Any ideas?