kenmwallace Posted January 17, 2015 Share Posted January 17, 2015 The pots on the front panel of the UX8 appear to only effect the XLR inputs. When recording with Garage Band, there does not seem to be a way to control the Line Input 1/4" jack signal levels. I have tried "dry" or not dry, but the output level sliders in the Pod Farm Settings/Outputs window don't effect the signal level Garage Band is seeing in either case. Any suggestions would be much appreciated. Ken W. Quote Link to comment Share on other sites More sharing options...
dtreed Posted July 6, 2015 Share Posted July 6, 2015 Hello all! First post here is to bump this question. I'm running OSX 10.9, and I'll be updating to Mavericks soon. I use Reaper as my DAW, and I've tried in Garageband too. I can't get the volume knobs to do anything with line input. Pretty much everything I'll do will be 1/4" cable input. Any fixes? Thanks! Quote Link to comment Share on other sites More sharing options...
dtreed Posted July 9, 2015 Share Posted July 9, 2015 Oh and I've tried to find a cheap mixer/splitter that has 8 outs so I could just run it into the lines that way, but no luck for a hobbyist. Insert ports always seem to send post trim but pre fader. At this point, if there's no fix, I may just end up modding a TS snake. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.