xyphod Posted March 7, 2018 Share Posted March 7, 2018 Hi wondering if you can help me. I have a requirement for three different output paths. a) 1/4 Jacks b) XLR with a cab c) USB 1/2 dry not effected signal d) USB 2/3 with a different cab. This is so a) I can monitor on stage using my power amp and guitar cabs b) Have a front of house signal with cab simulation c) Record into DAW with clean and effected signal for potential re-amping later on Quote Link to comment Share on other sites More sharing options...
dragonfet Posted March 7, 2018 Share Posted March 7, 2018 a and b are always possible. You would get a wet signal on both outputs. USB 1/2 is the wet signal as well, USB 7 is the dry Guitar In and USB 8 is dry Aux In (7 and 8 might be reversed, I'm not at home right now). Does that answer your question? Quote Link to comment Share on other sites More sharing options...
dragonfet Posted March 7, 2018 Share Posted March 7, 2018 Sorry for the double post, I just noticed the part about the Amp Sim. The easiest way would be to put a Send block before the Cab Sim. That way you can use the 1/4" Send Jacks for a wet signal without cabsim and the XLR and USB 1/2 Outs for wet with cabsim. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.