tedjallen Posted May 31, 2019 Share Posted May 31, 2019 I am using the Simple Pitch at the beginning of my signal chain to detune by one full step (-2). It is enabled for all snapshots in the preset and the mix is set to 100% and is not snapshot enabled. Most of them time I can switch between all snapshots without any issues. However, occasionally I will switch snapshots and all of a sudden my output signal (at least out XLR mono/left output) is completely out of tune and switching back to other snapshots doesn't resolve the issue. I have to switch to a completely different preset and then come back to clear the abnormal behavior. Has anyone else witnessed this type of behavior? I did see mention of odd behavior with some effects mentioned by Scott Minchk (The Helix Channel on YouTube) where when certain effects were enabled it would cause other effects to get disabled, but as I recall this was when switching a specific effect on via a stomp switch and was with earlier versions of firmware than the 2.71 which I am currently running. When this occurs I don't see any indication that the Simple Pitch block has been disabled or that any of its parameters have changed, most notable the interval or mix. I greatly appreciate any assistancea. Best Regards, Ted Allen Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.