JSinger4217 Posted May 8, 2020 Share Posted May 8, 2020 My HX Effect displays have been "glitchy." I will be using the unit when some of the displays go out. They are always different displays. When I restart the unit, the problem goes away for a time. I have reset the unit using pedal 5 & 6 and then reinstall my saved presets. I am not sure if this stage has re-introduced the problem. I do have IRs loaded onto the machine. Help. Take a look at my Reddit post. https://www.reddit.com/user/JSinger2 Quote Link to comment Share on other sites More sharing options...
tele_jas Posted December 25, 2020 Share Posted December 25, 2020 I just purchased a used one and it has the exact same issue, except it didn't go away with a reset or power cycle. Did you ever figure out the issue? Quote Link to comment Share on other sites More sharing options...
tele_jas Posted January 8, 2021 Share Posted January 8, 2021 So.... I sent mine to a Line 6 repair tech.... The issue with mine was the ribbon cable that connects the 2 circuit boards together. He unplugged it, blue compressed air and deox-it in and on the connections, plugged it back in and it worked! On 5/7/2020 at 10:29 PM, JSinger4217 said: My HX Effect displays have been "glitchy." I will be using the unit when some of the displays go out. They are always different displays. When I restart the unit, the problem goes away for a time. I have reset the unit using pedal 5 & 6 and then reinstall my saved presets. I am not sure if this stage has re-introduced the problem. I do have IRs loaded onto the machine. Help. Take a look at my Reddit post. https://www.reddit.com/user/JSinger2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.