HXFX switching for Bogner Red Ecstasy pedal

[maxm17]

Hello smart Line 6 community! 

I want to use my HXFX pedal (love) to switch on/off my Bogner Red Ecstasy pedal (also love), which has a remote jack for switching.  

Anyone tried this yet or have any advice on how to set up? 

 

Here's what Bogner's manual says about the jack/function:

"Remote Jack provides control of the On/Off and Boost functions via a remote switching unit TRS jack wiring: tip=boost function, ring = bypass on/off function, momentary action. "

 

I only want it to control the on/off of the pedal is possible. 

 

I already use Exp1 to channel switch my Friedman - works great. 

 

Been trying to program and am stumped. 

 

Thanks in advance! 

[AdamAndroidFG]

Shouldn’t be any different than switching your amps channel really, which I do all the time.

looks like you do too.

 

As long as you have a TRS cable and you go into command center, select the switch you want and turn it off and on, I can’t imagine it wouldn’t work.

Im assuming you’ve replicated the process?

 

what happens if you take the trs cable out of your amp and put it in the bogner pedal ? How bout if you pull the trs out halfway so it’s one click in? Be a quick way to check.

Maybe it’s the whole multi function thing that’s tripping it up-

if your only trying to turn it off and on, and it works halfway in,  hypothetically it should work with a regular 1/4 inch cable

 

Just guessing here- seems super frustrating man! Good luck 

[maxm17]

Thanks Mr. Android for the support and advice! Ordered a TRS to see what happens.  It did not like the standard 1/4" and Bogner had scary language in their manual about stuff breaking if not sending the right signal.  Thanks again!