bushwackermark Posted October 9, 2022 Share Posted October 9, 2022 Hello everyone. I recently set my HX up to pan hard left and right to direct my signals to amp for electric, and my piezo to an amp or PA for acoustic. It works great, but I find adding the pan blocks into my regular patch adds signal to my patch, changing the tone of the patch consiserably. It's not an issue with the piezo signal, but only the electric. Here's my signal chain. Electric into left guitar input> pan 100% left> Teemah block>send> Amp in (Friedman Runt or Orange Rocker 15, doesn't matter) >amp effects send >HX return>70s Chorus block>Gray Flanger>Kinky Boost>Simple Delay>Hall Reverb>Pan 100% left>L/mono out> Amp Return. The overloading happens with either the Timmy or Kinky Boost(for gain boost/lead boost respectively) off. All of my global ins/ outs are set to instrument level. And if I toggle any of them to line, there's still a big difference. When I toggle the pans off, my signal acts like I'm used to. The only adjustment for the pans is percentage left or right. Can I fix this? Thank you for any help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.