captainc Posted March 26 Share Posted March 26 Ok I was confused, then I thought I figured it out ... now I'm confused again. I feel like the manual isn't covering it or i'm just not wrapping my head around how this works. On my Katana, I can set all the settings how I like, then use the 4 preset switches to save those settings to a preset slot. On the Catalyst however, The amps, groups, banks and presets appear to all be tied to the same knob. So .... I have on bank 2 a preset using the Aristocrat that I set how I like it so I saved that to the A preset. I then configured a 2204 setting how I like and set that to the B slot. I can call up either on the footswitch. Great. If I go to the editor and select a different bank, I seem to blow over what's saved to the footswitch. Every time. What am I missing here? Link to comment Share on other sites More sharing options...
captainc Posted March 26 Author Share Posted March 26 Ok I may have figured it out again LOL. So using the app on my phone, I'm saving the presets to Bank 2 A and B. Switching to another bank, the footswitch just follows whatever presets are on that bank. I guess that makes sense. I was just expecting it to snap back to Bank 2 A/B. So I guess that leads me to my next point of confusion. Now that I have a 2204 mod preset on Bank 2 preset B, does that mean there is now a 2204 mod amp on that slot and not the Grammatico? I assume no but its a bit annoying not being able to see the amp model come up on the App version of Catalyst edit. Not sure if its the same for the full app. Link to comment Share on other sites More sharing options...
Recommended Posts