razzer10_4

Gotcha. For grins, here's the rear panel. http://www.manualslib.com/manual/588690/Crate-Cpb150.html?page=5#manual

I do happen to have a TS Y cable. Not sure if that does me any good. I believe I bought it a number of years ago when I originally owned a PB. I'm sure I thought I was buying a TRS cable only to discover the TS cable didn't work for whatever I was trying to do at the time. So seeing that the PB has L&R IN and the UX1 has Analog L& R Out, (hope this doesn't make me look like a total moron), would I plug the Y end of TS cable into the UX1 and the single end into the mono of the PB or would that require a TRS cable, or one step further, a single dedicated cable to each left and right IN?

I raise this question to get a headstart on a Crate Powerblock I will be receiving next month. The Crate PB has a Line-In connection on the rear panel consisting of two inputs: Right and Left/Mono. This Line-In connection is labeled below those two inputs as Effects Loop Send/Rtn. Now knowing that effects software perform better going through effects loops, how would I tie in the UX1 considering it has Analog Left and Right outputs? For the record there is an XLR line out with a level control on the head that I intend to use a combination cord consisting of an XLR on one end and 1/4 in. on the opposite end to a cabinet.