gabr1el

Just to confirm, guitar ---> hd ----> (od from hd---> loop)---> hd fx out ----> amp in ---> amp fx send ---> hd fx in ---> (hd delay) ---> Hd 1/4 out----> amp fx in ???

I didnt notice the hum because I was using another amp with effects and then changed the amp. Once I started bypassing the fx to set the amp I noticed the noise. The deluxe reverb has 50% hum by default.

OMG was that, thank you so much guys, I was scared of something electric going on. I feel dumb now !!!

What are you using to listen ? monitores ? headphones ?laptop ? in my laptop I cant hear it because is a low frecuency noise, but in my monitors i can hear the noise in the clip I uploaded :/ .

Is posible to put the od from the pod in front and the delay in the loop of the amp ?

It's a low frecuency noise, I can hear it in my monitors, my headphones and 2 amps but not in my laptop. And isnt fret noise because I tried with 2 guitars and 1 amp and the noise still there :(

Im having a weird noise in the signal, is by far more notorius in the blackface deluxe reverb vib channel emulation. https://drive.google.com/file/d/0B6UHks8GX810SGZudjVNMF9ITVU/view that's the noise, it's like a buzz 1 octave lower. here's he file in .wav https://drive.google.com/file/d/0B6UHks8GX810cFpYQ1hveFgyRW8/view And here's the patch https://drive.google.com/file/d/0B6UHks8GX810U2QyYm1HbG01Um8/view I've tried changing cables, 2 guitars 1 bass, using the xlr, the 1/4, the guitar input, the aux input, going into monitors, guitar amp, bass amp. Tried in diferent rooms, diferent electric plugs, tried both resets, the one with the left arrow and using the monkey aplication and the noise is still there. help me please.

I've done the calibration following the support's instructions here http://line6.com/support/page/kb/_/pod/pod-hd500-hd500x/pod-hd500xhd500-pedal-calibration-r161 but when y press C, my pedal goes from 255 to 40, nothing below. How do I solve this ? Thanks