aaronbagby

I am playing a solo acoustic gig where I'll be using my Pod HD Pro for vocal and guitar effects, straight into a 2-channel interface to the house sound system. I run guitar through the left side of the POD, and the vocals through the right. There are a few parts in my set that require the looper functions of the unit, but they coincide with my singing at times. Is it possible to run the looper on only the guitar's signal path? Thanks in advance.

Solved. I didn't know that using only one of the unbalanced outputs yielded a summed signal. So I'm running a cable out from the Right Unbalanced out into nothing, so that the stereo field stays true.

I'm playing guitar/singing for a cover band tomorrow, and trying to use the HD Pro to run some FX with my JCM2000, as well as fatten up vocals/add some delay and verb. I'm having a hard time setting it up. I have the cabling set up in this manner, and I'm 99% sure I got it right: Guitar -> POD Instrument Input -> FX Send L/Mono -> JCM2000 Input -> JCM2000 FX Send -> POD FX Return L/Mono -> Unbalanced Out L/Mono -> JCM Return -> JCM800 4x12 cab Beta 58A -> POD Mic Input -> Pod Balanced Out Right Here is a screenshot of the patch with mixer settings shown: My issues: -The sound from the mic is being carried to the left output somehow (did I set up the mixer or inputs wrong?) -The FX that I have set up after the FX loop block of my preset aren't audible when I engage them with the footswitches I assigned I didn't have these issues when I was not using the FX Loop Block. I simply ran an amp model on the top path of the preset. This worked fine, but I really prefer the tube preamp, and want to get this figured out ASAP. I know some of you guys here are wizards with the HD products. Any help is appreciated.

I'm playing a show in two weeks, and I will be doing guitar/lead vox. I have all my matches set up for guitar tones. What I'd like to do now is set up each of my guitar patches to also have a separate signal path to add some basic reverb (on the whole time) and a bit of delay to my vocals to help them sit better in the mix. Can anyone walk me through the setup, where the left-side output (guitar) will go to the return jack of my JCM900, and the right side (vocals) will feed straight to the snake into the mixer? I've read through the manual a few times, couldn't find anything to help. Thanks.