mholubec

SUCCESS! It works. Thank You Thank You Thank You!

I tried your PC Patch and that didn't work either. I have attached midi monitor pics for Helix Snaps 1,2,3,and 4 . Also midi monitor pics of GT8 Program 1,2,3,and 4.

I will get to work on that... but I can switch banks/presets from Helix to GT-8 via midi...is that what you mean?

I used your preset and set Global Settings>Preferences and set SNAPSHOT EDITS to RECALL and still did not work. Any thought on why it works with boss gt-8 and the amp? On the gt-8 I use Bank 4, Patch 1, 2, 3 ,4 and it works with the amp. Can I recreate those midi sends? What would the global and command setting be? https://static.roland.com/assets/media/pdf/GT-8_OM.pdf I so appreciate your willingness to help!

I didn't have any luck . I attached my patch for you to check settings are correct if you don't mind. RANDALL 4 CORD.hlx

I'll keep you posted... I won't get to this until tomorrow. Thanks again for all your help!

Attached is my stripped down preset copy(with a separate instant command for each amp channel CC). Amp dip switch is on midi 1 as when I plug in the Boss GT-8 on midi channel 1 it works perfect. The amp cycled off several times. I really appreciate the help guys! RANDALL 4 CORD.hlx

I got everything set still does not work. I even tried setting up an instant command for each amp channel/snap shot (leaving one snap active per instant command).

Thanks for the reply. The tutorials were for other midi switchable amps and Helix. I can switch the Randall via midi using a old Boss GT-8 using a 5 pin cable. That uses program changes(not CC). The Helix will switch the Boss GT-8 via midi.(Bank up down and Presets). I tried to duplicate the program changes in the GT-8 in the Helix, so the amp's midi would think it was the GT-8 but I couldn't get that to work either. I can't help but think I'm missing something in global settings or the command center. Any ideas?

Hi guys! I have a question for you all. I'm trying to setup 4 cord method with a Randall NB112. Using snapshots to switch the channels on the amp. I went through several tutorials and still can't get it to work. Can someone give me the settings I need in command center and global midi settings to get this to work? Here is a link to the Randall manual if it helps. I know both Helix LT and the Randall both work midi with other devices just not each other. Thanks https://www.randallamplifiers.com/.../02/NBKING112_v2.pdf...