Chimera1to1

Thanks for your help. I've settled on using the red box xlr from the amp into the pod to stereo speakers but still running the dry signal to a 2x12 cab. It sounds awesome

Hi Jim, got the tone controls working by changing the pod fx loop mix to 100%.. Tech specs on the TM18 Input jack, 1 Megaohm Send jack, 250 ohm, max, +6 dBV Return jack, 500 kohm, -3dBV I've set the FX loop on the pod to 0 dB send and 9 dB return. All switches set to amp level. I got studio eq set to +12 dB gain and mixer level to -12 dB. Does that sound correct?

Got a Hughes and Kettner Tubemeister 18 head and hooked up as the description of the 4cm.by jimreynolds. Running a Pod HD Pro for fx. Send and return levels set as advised on the Pod but found I had to turn mix down to zero because of noise. With the pod in the fx loop the tone controls weren't working on the tube sister. If I swapped in just a Bad monkey tone controls work OK. Could this be down to impedance and gain settings in the fx loop