rw_groesbeck

The issue is the acoustic picks up a lot of ambient noise and the tuner struggles to track which signal is trying to be tuned, particularly when tuning the electric.

Hey everyone! So I'm building a patch for my singer/guitarist. She plays acoustic the majority of the set and electric on a couple songs. We're wanting to run both instruments into her HX Stomp at the same time, plugged in using seperate cables. I've built a patch that has her electric amp and fx on path A running in/out from input and output L, her acoustic on path B running in/out from input and output R. Everything has the proper pan and operates as it should. Each path has a gain block assigned to it to operate as a mute so that only one path is running out to FOH at a time. Footswitches are set as follows: FS1: Solo channel for the electric (Path A). Engages drive, verb, and delay. FS2: Alternates gain blocks being used to silence 1 path at a time. FS3: Tap/Tuner What I'd like to do is have it set to when path A is active, the tuner will pick up the electric guitar and will NOT pick up the acoustic on path B. Is this possible? As of now the tuner is picking up signals from both instruments at once regardless of the path selected. Thanks for your help!!!