musicjuice

Thanks!!!

https://www.dropbox.com/t/2SCpfoRlMx2LuYAq Here's a video of the behaviour.

Hi, thanks for replying. Is latching vs momentary a 'per preset' setting then? As in preset 1C is latching and in preset 12B is momentary! As far as I can remember latching/momentary is a global setting and it affects all presets...

Hi! Question: I have an amp that responds to MIDI PC and CC. I have set my HX FX so that in one of my presets (01B) one of the switches (switch 5 in this case) is linked to command center, sending a Bank/Program Message (Base midi ch, Bank CC0 none, Bank CC32 none, Program 57). When I press it it switches my amp to Master 2 (so that I can solo on the same preset). When I press the switch the corresponding light goes on when pressed and off when pressed again, as with any other block turned of/off. I've put the same command in another preset 12C and in this preset when I press the assigned switch the lights only turns on when I press it and won't stay on...it goes off as soon as I lift my foot. I can't find any setting or any difference in how the switches are configured in the two presets, it's just the same function, only in preset 01B the light turns on when pressed and off when pressed again, in preset 12B the light only turns on for a second when the switch is pressed, then goes of... Any help??? I've made a video of this, if needed.

yes, even if I mix up 1 exp and 1 volume pedal, or two exp for that matter. just using two pedals, 1 as exp and one as vol (regardless they are volume pedals or exp pedals) shows to issue.

And another test just done, two "proper" expression pedals (no volume pedals used as exp to be clear), same behaviour, it's definitely how HX FX handles two pedals connected at the same time.

I've just made a test: made a new empty preset, selected just one volume block, assigned pedal 1 to it. no other blocks in the preset. pedal 1 (volume) goes 0 to 100 only if pedal 2 (not assigned to anything) is in heel position. if I put in in toe position, pedal 1 goes 2% to 100%...

H Hi and thanks for replying. Yes, values are set at 0 and 100, and the pedal assigned to volume block goes correctly 0 to 100 if connected alone. As soon as I connect the second pedal it goes 2% to 100%. It only comes back to 0 if the second pedal is also in heel position. And there's no other controller assigned to volume. I checked the pots, it's actually pedal one 50k and pedal two 250, maybe it's those values? Can't really figure out how come that they interact with each other...

Hi. I'm using HX FX (latest FW) and two Ernie Ball VP Jr as EXP pedals, first one is volume (assigned to a volume pedal block just before delays and revs) second one is trem/vibe/rotary speed in corresponding fx blocks. Both pedals are connected using the output of the pedals, as explained in manuals and forums. Everything works, but volume pedal doesn't reach perfect zero unless the second exp pedal is turned all the way down! What has the second pedal to do with the first? They are not connected in any way... I believe volume exp pedal should operate regardless of how the second pedal is positioned, if it's all the way down, all the way up or any position in between, right? Any suggestions?