Jump to content

guitarxman

Members
  • Content Count

    2
  • Joined

  • Last visited

Community Reputation

0 Neutral

About guitarxman

  • Rank
    Just Startin'

Profile Information

  • Registered Products
    2
  1. I have the same thing on a spider IV 75, it seem there is a general reliability issue with this amp. I precise that the screen and preset selection works properly during the breakdown, as well as the volume rotactor. I suspect the motherboard. the temperature on the surface of the DSP and other components look correct, less than 30 °C. I have also a regulator 7906CT delivering -5.9 instead of -6,8V indicated on the board to check. this is strange when the amp has been switched off a long time , the amp can work 5 min, before cutting off the sound. (no sound on the headphones output as well then). when the amp is turn on again just after that, it cuts off the souns some seconds after. it seems it needs some time to recover .. :-) that could make me thinking about a capacitor issue ? I also suspect a quartz to be half broken, I will still investigate and let you know if I can find any solution
  2. Hello on my amp spider IV 75, the power amp TDA7293 smoke when I turn on the power. I can hear a little boom in the speaker the the TDA blows and smell. I replaced the TDA component by it happen again all the logic, master board and pre-amp stage seems to be working. If I plug my phone playing music in the MP3 entry and an audio headset in the external jack, I can hear the music, and master volume control also works in this case any idea on what happens? the amp is out of warranty, and pretty old so a repair done by a service center is not a reasonable economic solution finding the wiring schematics of the amp would help if anyone could provide it? Thanks in advance for your advices
×