mattskii

Hey Triyche. Thanks for that. I see, too. I was going about things in the most convoluted manner. I think what threw me in part was the video instructions I'd seen were for the ipad app, or an earlier version of the app where the tap locations were/are in different places on the interface. I was also following a 'saving' path/procedure that is not part of the sequence for saving My Tone to the hardware. Thanks again. Cheers, Matthew.

Hi adagosto. I appreciate that's the work around. As above: "... if I go back to the main menu, and select AMPLIFi FX100, I get the list of all the presets (those default tones that are on the pedal board). If I pick one of those, select the editor, tap on the cloud symbol, edit the name, then next tap on the floppy disk symbol, I get 'Save to AMPLIFiFX100' from which a blue band appears on the top saying 'Tone Saved to Hardware'." However, it appeared from videos and tutorials that you can save from My Tones to the Pedal Board. Thanks anyway. Triryche, did you find anything? Cheers, Matthew.

Hi fellas. Thanks for the replies. I don't have that option. I do if attempt to edit a preset, but not one of the tones in 'My Tones'. So, lets go through the steps (this is on Android): 1. I pick one of my tones from 'My Tones' (highlighted in red with little speaker icon). 2. Go to 'Editor' via the main menu (opens the amp settings). 3. Tap on the cloud symbol with the upward pointing arrow, top right of the screen ('Basic Info' panel opens). 4. Edit the name (so that it can be saved). 5. Tap on the floppy disk symbol, top right of the screen (menu drops down with the options: 'Save to My Tones'; and 'Save tone as...'). So, that's it. If I choose 'Save to My Tones' I over ride the existing tone in 'My Tones'. If I choose 'Save tone as...' I add a new tone to 'My Tones'. Apart from the floppy disk icon, there's a bin icon (for delete) and a cloud icon (same symbol as step 3) from which a drop down menu offers the options to 'Publish to Line 6 Cloud' or 'Share...'. Neither are relevant to saving to hardware. However, if I go back to the main menu, and select AMPLIFi FX100, I get the list of all the presets (those default tones that are on the pedal board). If I pick one of those, select the editor, tap on the cloud symbol, edit the name, then next tap on the floppy disk symbol, I get 'Save to AMPLIFiFX100' from which a blue band appears on the top saying 'Tone Saved to Hardware'. In short, I can't save a tone from 'My Tones' to the pedal board (hardware). Am I missing something here? Cheers, Matthew.

Hi there. A question. How do I save a tone that I've created so that I can use it from the pedal board? So, I've created a tone I like - something akin to my what my '77 JMP sounds like. I can save it to 'My Tones', but that's not the pedal board. That's the app, I think. Obviously off to the cloud, as well, but the key thing is that it is not the pedal board. I access the tone from the app, not by pedal board. I presume I need to over ride the presets, but it's not apparent how you go from 'cool, I like this tone', to 'now let's get on the board so I can use it properly'. Any thoughts? Cheers, Matthew.

Hi Trirche. Thanks for the input. Did some research last night and had another go at getting things going. It was the latter point that was missing from the equation. After installing the firmware version 2.10.00 update and repeating the bluetooth pairing, the app began controlling the output. However, I wish this was in the instructions/manual - that is, words to the effect: "This is not plug and play. Install the latest firm where up before attempting to use the equipment". I now realise now that I missed the relevant information about the firmware on the AMPLIFi Remote app page. Maybe they should make it a little more conspicuous. I don't know about anyone else, but prerequisite software isn't common for the installation of apps. Anyway, thanks for that. Cheers, Matthew.

Hi all. I've got the FX100 working. I've done a factory reset and calibrated the board. Guitar input okay. Headphones out okay. I can hear the presets. Knobs and vol/wah okay. Installed the app to tablet. Signed in and have the app running. The internet connection is good. I can search for tones. Blue tooth is activated. Turned on the blue tooth at the pedal board. It is paired to the app. I can see that it's connect in the tablet's setting and the blue light on the blue tooth symbol on the board in on (not flashing, either). However, the only control I have is on the board itself. There is no control via the app. How do I get this thing going? Is there anything I've not done or have done wrong? Any help appreciated. Cheers, Matthew.