Brynbeagle

I have presets for an amp model that I really like, Is there any way I can look at each value/% , for each knob (treble,bass,mid,drive, etc.)? I see a dot on the side of each knob on the display Screen, I'm assuming that's the preset value that was saved, but is there a way to displays actual number value for each knob?

I'm use amp pre model as my "overdrive". When I turn off the amp modeling, I would like to have the clean tone as my bassman. I usually play at 2.5-3 on the volume of the amp. With hd500x connected and bypassed, I need to crank to about 5 to get amp to a descent level.

After taking the feet off. Did u put the screws back in the hd500x?

My direct volume level is way louder than when I have the hd500x running. I have master at 100%, and when a/b ing, the direct signal is still louder than the bypassed hd500x level. Any tips out there, to help me match the levels. I'm trying to run the hd500x intI the front of a 59 Bassman reissue. I've been a/b ing Normal channel 1 (hd500x) and 2 (Direct line in).

Just got the Hd500x and I was wondering if anyone has any suggestions to Velcro-ing it on a pedal board. Can I take the feet off and put the original screw back in without damaging the hd500x internally? Or can I just take the feet and screw off and have the flat surface like that? (Do the screws on the feet hold the u it together? Any suggestion would be greatly appreciated thanks.

If I was to use amp modeling. What would be ideal way to setup in front of amp? I heard there are "pre" settings.Don't know if that would be Good running into the front.

I've read/seen in so many articles/videos that the HD500fx sound Is superior through the fx loop. I have a old jcM 800/fender bassman combo and a vox ac30. None of these amps have fx Loops. Before I make the purchase, I was wondering how much loss will I get connecting through the front INput jack of these amps? The hd500fx will be used primarily as a stomp box, no Amp modeler enaBled for the most part. Thanks for any responses guys.