Please ensure Javascript is enabled for purposes of website accessibility Jump to content

jimkarl1

Members
  • Posts

    3
  • Joined

  • Last visited

jimkarl1's Achievements

Newbie

Newbie (1/14)

  • Week One Done
  • One Month Later
  • One Year In
  • First Post Rare
  • Conversation Starter Rare

Recent Badges

0

Reputation

  1. Unfortunately did not result the issue - I still can only get to the Max value of about 176. I believe it is supposed to go all the way to 255. It's possible that I jarred something when I was inside the unit fixing the loose Ethernet connector. Is there something to look for on the backside of the pedal that can be adjusted to get tot he full MAX value?
  2. Unfortunately the same result - my Max only goes to about 176, min to about 006 (close enough on the min but the max is way off.). My understanding is the max should reach 255 or so. It's possible that I made something happen when I was inside fixing the Ethernet connector which had popped loose. Is there something to look for on the inside (backside) of the pedal that can be adjusted that is preventing me from reaching the max value?
  3. Having a problem calibrating my FBV Longboard (using a PodXT pro rack mount preamp). A couple weeks ago lost all control of my volume pedal when setting up at the gig. Very little volume fully pressed. When I got home I found the calibration instructions (Amp1+amp2+Modulation) and it show the values for the Left volume pedal which is the one I use. Instruction say it will go from 000-255 but when I press the pedal full forward it only goes to 170. It doesn't matter where I start the pedal in the process (instructions say middle of range which I did, then tried full back then full forward - always with the same Max result of about 170.) AT this setting I basically get little to no volume until the very end of the range - literally the last few millimeters of travel on the pedal - very hard to control onstage - and also with the end result of no giving me my max volume so i have to turn other pieces up more than I every had to in the past (e.g. preamp output or amp inputs.....) Any thoughts why I can't get the full 255 Max range on my pedal? I looked inside - nothing obviously broken on the pedal and seems to traverse fine.
×
×
  • Create New...