NobodyOne14

I did, and I can hear the audible difference between on/off, and when the wah is on, I hear the high end filter effect on the sound, as if the wah pedal is fully depressed at toe position, but moving the pedal does nothing, and when the wah is off, there's a clean sound,,, the toe switch does toggle the wah on/off, and being the rest of the switches show red as being on, then depressing the pedal toe switch toggles the EXP1 and EXP2 lights red and green, (EXP1=Red, EXP2 Green), meaning when the EXP1 light is red, the wah is on, and when EXP2 is green the wah is off, as shown on the display by the wah block alternating white/black during the toggle. EXP1 = red = on, sound from effect is heard when the filter is being manually altered using the POS max parameter from 0% to 100% and back, then putting max back to 100% and moving the pedal does nothing, there's not even a visual indication of the parameter(s) being altered by the pedal. EXP2 = green = off, clean sound from unit. Sooo, by now, after trying this and that, there could be a possibility that the circuitry for the EXP pedal is borked, and the unit may need fixing.

I have tried all ways possible. The current assignment is:- EXP1 = wah controller EXP1 = toe switch enable wah (Red light) EXP2 = toe switch disable wah (Green light) And still nothing, but the on/off using the toe switch does work as set out, I can hear the sound difference between enable and disable, but it's the pedal itself that won't control the wah effects sound, IE manual filter position.

After setting up a custom tone, I added a wah fx at the end of the signal chain, and assigned the on/off to the pedal toe switch, showing the lights EXP1 red = wah on, and EXP2 green = wah off, but with EXP1 = on and moving the expression pedal does nothing, I can't even see the pos parameter move with the pedal, I even have min = 0% at heel pos, and max = 100% at toe pos, for testing, shouldn't I be able to see the parameters change as the pedal is depressed to toe position? then to heel position? I've tried every which way possible and the expression pedal still does nothing not even for volume/pan, is there a possibility the pedal itself or it's circuitry is broken? I even tried it with one of the inbuilt tones that have the wah setup by default, and still nothing.

After reading through the support archives, I noticed there is and will not be any support for Android for POD edit. I'm not going to go out and pay 100s $ for a laptop just for the sole purpose of sitting it on the floor next to the POD HD500 just so that I can download and try out various custom tones, otherwise, I have to unplug the POD, carry it to the other end of the house place on the office desk, attach it to the PC, then download and sync the custom tones, unplug it, carry it back to the practice room, plug it in, try out the sound, maybe it's not right so off I go again back to the office, and repeat until I find a sound I like, and I'm not going to move all my equipment from the practice room into the office either lol,,,,,so, by using an Android app, and a tablet (people are using tablets more so than laptops now), I can just plug it in, fiddle around, get the sound I like, unplug it and done, all without laying on the floor next to a laptop, or moving it to the office,,,,,I can just lean the tablet on the music stand, and without akeyboard to get in the way, I can play around till I drop lol.