anarchyrecoil

Wasn't the Quadra either! There's a midi thru setting on the Zoia that was causing a midi feedback loop. Helix had midi in from Zoia Helix was going out to Quadra Thru which fed Zoia, Whammy and SPD-SX

Sorry, I've narrowed the problem down to my midi splitter box, the Quadra Thru, from Midi Solutions as the source of this jittering.

I suppose I should have mentioned it in the first post, each device is on a separate channel. Helix -> Ch 3 SPD-SX -> Ch 10 Whammy -> Ch 11 Zoia -> Ch 13

Hi all, On a lark I wanted to try to use my new Empress Zoia pedal to send midi CC to some other hardware. So far, I've tried to send a CC to modulate the treadle position on my Whammy IV and also tried send a sequence to a Roland SPD-SX to play a drum pattern. Both work fine if go directly to the hardware, but if I send the midi to the Helix and try to use (5 pin) midi thru, all I get is a jittery mess. There is definitely midi going through, but it's garbled. The Helix also starts to behave a little oddly; buttons not responding weird page changes intermittently. Has anyone else encountered this?