bedeedlededo

Was afraid of that but thought I’d ask. thx

Hello, I searched the forum and did not see a topic covering this so here's my question hoping for some suggestions... I have lots of presets that I've invested lots of time on. My exiting presets are in mono and I now have a stereo rig and need to copy/convert many of my presets to stereo. My mono "Simple Delay" blocks have parameters like bypass assign and controller assign customized to expression pedals. I see there are both mono and stereo "Simple Delay" blocks in helix: QUESTION: Is there a way to take a mono "Simple Delay" block and convert it to stereo and retain the parameters of the original mono block? Just trying to avoid all the work that's in front of me in going through all these blocks one-by-one and setting them with the original parameters again. Cheers and thank you for taking the time to read this.

Hi All, Newbie here: I searched the net and forums but I could not find answers to my specific questions so here goes… I'm an old-school player with decades of experience of playing and tinkering. I play heavy blues, hard rock, metal, and classic rock. I have a modified Marshall tube-amp setup (among others) and thinking about pulling the trigger and getting a helix. I want to keep this short so allow me to list my equipment then I'll get to my questions. Friedman-modded Marshall 1959SLP -- this is the foundation of my tone: single-channel amp effects loop (+4db / -10db). 4 holer ganged / normalized to two inputs added gain stage 4x12 cabinet with Celestion G12M 25w Greenbacks Front-end: GCX Audio Switcher with Ground Control Pro foot controller 8 or so stomp boxes ISP decimator Effect-loop: TC-Electronic G-major 2 ISP decimator II 2x QSC K12 monitors: PA (thought I’d include these since they might be useful with helix). My Problems: My TC-Electronic G-Marjor 2: It is unreliable and freezes and I can no longer rely on it. My Marshall is a single-channel monster and I love the dirty tone, but I can’t get clean tones out of it. My Objectives: To continue using my Marshall head to provide my dirty tones. Replace my TC-Electronic G-Major 2 and my front-end stomp boxes with helix. Determine if I can use my marshall with helix and: Bypass my amp's pre-amp with helix in the return of my effects loop to get clean tones with / without effects. Engage front-end input and utilize amp pre-amp for dirty tone. My Questions: Can helix be configured to: Bypass my amps front-end input and give me clean tones via effects-loop return?When I plug my guitar directly into the effects-loop return of my amp, I cant’ seem to control the volume – will helx preamps be able to drive my output levels to match the level of my front-end input? Use my amps front-end and use helix to give me effects in the front-end and effects in the loop? Any creative ways I can use my QSC K12 monitors along with my Marshall? Thank you in advance for your input.