RevBeard

Thanks for the insight! it’s a Blackstar Series One 200. It uses Program Changes. I’m currently using Preset mode as I only need 7 different tones throughout my set and it’s handy to have all 7 in front of me the whole time. Ideally I’d have the 7 tones across the first 7 of the 8 FS and activating each FS would change the FX and the amp channel with the same FS. thanks!

Hi all, I'm having a struggle with the MIDI programming - I'm well aware it's probably something simple! I want to use the Helix as a ground control to switch the channels on my amp but also select certain FX with the same button. for instance; Button A1 = Channel 3 on amp with Precision Drive on Helix Button B1 = Channel 1 on amp with reverb, delay and chorus on Helix Button C1 = Channel 2 on amp with delay and octave on Helix etc etc How do i program the MIDI Program Change AND have the fx running at the same time? I tried using Instant Commands in Command Centre and it switched the amp but the fx then didnt work! Any help would be greatly appreciated!!! Dan