Okay this post is a close to the problem I have with mine as I can find. This isn’t a headphone/cable issue, i’ve Checked that. My FH was fine, I ran stereo xlr out to mixer (output set to line) and had headphones out. Both headphones and car sounded perfect with guitar or even streaming songs off my phone through the unit. Perfect. So yesterday I fire it up and all of a sudden almost no xlr out volume. I could barely hear the signal and it sounded like 3 reverbs were on the channel. So I try headphones, same thing. This horrible reverby signal. So I stream a song same thing absolutely saturated in reverb. Did factory reset and re loaded newest firmware...nothing. The only thing that works is pulling out the 1/4” headphones jack just slightly. Then seems just fine. No soloution for the xlr output. I have no idea. This same sound is across the board, factory sounds, cloud sounds and just audio. All cables were cross checked. But nothing changed in my setup. Any ideas?
