Hi. I'm trying a new configuration for my pedalboard using the Send / Return of the HX Stomp in order to have two different pedal connected and activated via FX Loop Blocks. I use the Send output and split it (i try a Radial ABY and a Parallel output of one of the pedals) into two pedals, then I connect the output of one pedal in the Left Return and the other pedal's output into the Right Return. I configured the global setting in order to have an Instrument output in to the Left and Right Return. Then I put one Right block in to the main (A) path of the HX Stomp. When I activated the block for FX LOOP L I had no problem, the pedal works well and I can turn it on and off using HX button where I assigned the FX LOOP L. Then I did exactly the same with the FX LOOP R and when activated it completely shut down the signal. I thought it was the pedal, then i try it directly into the amp and had no problem, I switch all the patching cables and still not working, I swap the Return cables connecting the correctly tested pedal into FX LOOP R and the issue pedal into the FX LOOP L, same problem, FX LOOP R kills the signal when connected. Then I thought that using a TRS cable in the send jack thinking that could mechanically activate one switch so that the Returns could work like stereo, it didn't work. Any idea on what I may be doing wrong?