dfurdon

Just an additional comment and maybe related to how this is setup, i just don't get any low end. The US Double Nrm preset is about the only one i'm getting some decent low end out of.

So I now have a Power Cab plus 1x12 So I have a monitor Selector and basically just connected up an XLR to the Power Cab so that I could use it as 2nd Monitor. I don't have a hardware modeler just using Helix Native. It works, but am i really going to get the sound out of it that I should. I'm using Pro Tools. i just wonder if Power Cab is getting enough input gain? Sorry for the Newbie question, I am looking to purchase a hardware modeler soon. Thanks!

rd2rk, again i ended up with a bad cable causing an issue. thanks for the help

rd2rk, I've got everything wired properly checked and re-checked so just not sure if maybe there is a setting I'm missing?

Sorry but that doesn’t show anything

I have connected up my HX Effects via 4CM. When I bring up one of the 4CM presets all effects before the FX block works fine, but no effects work after the FX block. I’m stumped. Any help would be greatly appreciated.

Thanks rd2rk!!

Hi, a bit of a newbie on this subject so would appreciate any help. Currently I'm using STL AMP HUB, THU and a few other modelers. I plug my guitar into my Focusrite Interface and i am able to play through my studio monitors. I'd like to be able to use a dedicated Speaker Cab in place of the monitors. Can i use the Line 6 Power Cab in this way? I have a monitor selector unit so I can connect it up to the Power Cab when i want use the modelers. I'm assuming i can do this but want to make sure before going out and buying the Power Cab. Appreciate any help! Danny

Folks looks like I had a faulty cable all is good thanks for reaching out.

Ok thanks

MTB is is connected to Send Return in FX 2 of the HXFX OD Preset.hlx

I watched a video on Peach Guitars that showed putting an OD pedal into the FX loop on the HX effects and in the video he was able to essentially turn off the OD pedal via a footswitch. When i hooked up my Mesa Throttle Box in this manner i engaged it by taking it out of bypass but when I engage the Footswitch on the HX effects it does not take it out of the signal chain, it does seem to knock it down a few DB's but the effect is still being heard through my amp. Any thoughts?? Thanks!