JRSpin

Hey guys, how are you guys doing? So, I've been using my Stomp XL for almost a year now and so far so good, I've made a lot of shows with it and all that stuff. But, for a couple of months now I noticed that sometimes a message pops up saying if i want to assign an effect to my FS3 Button, as if I have touched the FS3 button for that, but I didn't. It shows up this message then it disappears. Sometimes it shows right after it boots up, and sometimes take some minutes to show up, then it disappears. It is not causing any other problems, but it is really annoying. Can you guys help me out? I've already disabled the "touch select" thing on global settings but it seems that it ignored that and still working as if have the touch working. Peace!

Thanks! I was trying to say if he already did that in the input.

Hey Kendall, nice to hear that! I'm using my Stomp XL as my only pedalboard for a couple of months now, and so far it is replacing all of my analog drive pedals, except for the fuzz. The HX is going direct in the input of my tube amp. Are you running your set this way too? I had problems using some preamp models in the HX, so I've started using the full amp models and got better results, but never tried with the IR block, maybe I'd try that too. All the best, Joe in Brazil.

Thank you my friend! I've tried that preamp model once. I'll it again and make some new tests.

Thanks mate! I guess I'll use the full amp of those models instead.

Hey guys, hope you are all doing great today. Something is going on with my sound. I've already tried a lot of the HX preamp models, whether in front of my tube amp or in the effects loop with the 4 cable method. Thing is, most of the time, even with the drive of the model all the way up, it doesn't "get there" it doesn't crunch. When using the 4CM, everytime I select the Vox or Matchless models, sometimes JTM 45, they drop the volume a lot, even if I put the channel volume and Master at 10. This happens when I try hooking in front of my amp too. Other models as the Placater's, high gain stuff, or the tweed models (not all of them) seem to work just fine. Sometimes I need to run the full amp model, to have that vox or matchless tone. Do you guys have faced anything like that? Peace!

Since I never use a fuzz with a chorus, I'll set a footswitch to activate the 70s Chorus and to change the input impedance to 1MOhm at the same time. I think would be the better solution

You are right! The only down side that I see if I do that is that I can't use the Fuzz in the HX properly. I'm thinking of staying with "Auto" input impedance and "Enabled" set in preferences. I'll keep using other chorus types.

What's up guys! A question about Input Impedance: I've been using my Stomp XL with my analog drives around it, but most of the time, I tend to use only the drives from the Stomp, as I've found a few of them very useful for my needs. But I've noticed on the modulation effects, the 70s Chorus model, bring down the overall volume a lot! Models like the Chorus or other modulation effects didn't seemed to have the same issue, so I thought that could be a Input impedance issue. My In-Z setting on all of my presets it's "auto" and on my preferences it's "enabled". I've saw a video from John Cordy months ago explaining about that, so when it's set to "first" it will consider the impedance of the first pedal in chain, wheter it is on or off, and when you set to "enabled" the impedance will be set by the first pedal enabled in the chain, so I've been using this way since the day that this option made available. My question is: How do you guys work with this? I'm not complaining about not using the 70s Chorus, since there's a lot of other good models there. But I've been basically using only the stomp with my tube amp at my gigs, even if I bring my drive pedals around it. Would you guys recommend any settings? All the best!