pureaddict

It works great thank you. I can mix as I please, and the headroom for both the dry sound and wet is amazing. Today I am trying to create a patch with a 2 speaker Rotary effect (1 x horn and 1 x woofer) My best efforts involve a Y Split with a stereo 145 Rotary block on each path, one path panned to horn and the other path panned to woofer. Then pan A left and Pan B right in mixer and out of stereo FX loop block to my amps. Is there anyway to use just 1 block of 145 Rotary and route the horn to one of my amps and the woofer to the other?

Thanks friend, I will try this evening :) I really appreciate your input.

It has an fx loop, it just also happens to have a line out, it's a HK Deluxe Tubemeister 40 (in 20w mode) The 2nd amp is a Joyo Zombie clean channel Both cabs are 25W Greenbacks

Hi @ all! I have a 2 amp wet/dry setup working as follows: Guitar -> real Comp/OD pedals -> Amp 1 Input -> Amp 1 Line Out -> HX Stomp Input - > Mod+Rev+Dly -> HX Send -> Amp2 FX loop Return There is a phase and ground loop issue, that's no problem, I have a P-Split on the way to me. My question is as follows, I have a patch where I wish to use exp pedal to go from dry + a small bit of HX fx to completely wet (NO DRY AMP SIGNAL) - where can I tap or how can I set up HX to make this (seemingly impossible) task happen? Just to be clear, I just wonder where is best to tap, I don't need anyone to tell me how to set up the actual FX, it's specifically about the routing/tap of wet/dry physical amps to achieve the effect as I mentioned. I wish my tap to have full colour of real pedals + preamp of Amp1 if possible. I can settle for pedals only (I only use a clean amp channel) Thanks in advance

As I've mentioned, my first post WAS asking too much, I have simplified it, your input would be appreciated :D 2 delays in parallel, 1 reverb and a cab sim amp fx loop -> HX input -> delays+reverb -> HX Send -> amp fx return -> amp di -> HX Return -> Cab sim -> HX out -> FOH

Ok!! Thank you rd2rk, my apologies, the first post WAS asking quite a lot The "simple" version I just mentioned above is possible without the wet dry wet shenanigans? block for 4cm, 2 delays in parallel, 1 reverb and a cab sim amp fx loop -> HX input -> delays+reverb -> HX Send -> amp fx return -> amp di -> HX Return -> Cab sim -> HX out -> FOH I have a DI that can do the trick :) And I'm sure I can get the switches to do as I want ;) I would be happy to be full mono and have just this functionality with custom IR tbh, it would solve about 40 problems xD

I appreciate your response. As far as I can tell it's 5 blocks including the block for 4cm. 2 delays in parallel, 1 reverb and a cab sim. (6 if parallel needs a block idk, I dont have one) I was thinking I could go amp fx loop -> HX input -> delays -> HX Send -> amp fx return -> amp di -> HX Return -> Cab sim -> HX out -> FOH Is it not possible to flow in and out of the device this way? Thanks, Paul

Bump? Can nobody tell me if its possible? Is it even possible without the advanced part I listed????? amp fx send -> HX (delay and reverb) -> amp fx return -> amp di out (without speaker emulation) -> HX Cab IR -> FOH/DAW

Hi all, I have a use for HX Stomp if the following setup can be used, if somebody could please confirm, that would be amazing. I just can't get my hands on one to try. This is the basic functionality I wish to have in a static patch. I want to use my own comp/gain/mod pedals and switcher up to my amp head (HK Deluxe 40), I then wish to come out of FX loop to HX for time based FX. These FX must be 2 delays in parallel (digital delay (in line) with parallel tape delay (full wet)) with external midi sync and a following reverb. I must be able to latch open/close the tape delay effect at any time (either on board or external switch it doesn't matter). Latchable Freeze or Hold effect. After the FX loop returns to the amp (and my onstage speaker), I wish to take the amp DI signal back to HX stomp, add a/my cab IR and then send the whole lot out of HX to FOH in mono. Advanced setup I would like All as above, but with a (separate?) stereo FX send to the desk, a sort of Wet Dry Wet setup I'm hoping HX can be the answer to my prayers :) Thanks all in advance <3 Paul