Please ensure Javascript is enabled for purposes of website accessibility Jump to content

acas1207

Members
  • Posts

    2
  • Joined

  • Last visited

acas1207's Achievements

Newbie

Newbie (1/14)

  • First Post Rare
  • Conversation Starter Rare
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. Thanks. That article was helpful. At home I use a wedge speaker which is the same speaker I use as a monitor when I am playing a show. At rehearsal, I plug into a soundboard and hear myself through a larger wedge monitor, while my recorder is center room, mostly "hearing" the PA speakers. I was amazed to hear on the recording that my intro to a song (just me playing) sounds great, then the band comes in and you can't hear me at all. We play 60's, 70's, 80's classic rock, and I use a few different presets for different songs. This is the one I'm having the most trouble with. I'll try adjusting the high cut, and cranking mids even higher. Also, tweaking at gig volume might be key. I try getting a good sound at home, before rehearsal, I can't crank it, but it sounds right at the lower volume. Whatever I do at home doesn't translate when I'm at rehearsal where it is louder. My band mates will have to suffer while I experiment... Thanks again.
  2. I'm a relatively new Line 6 User. I'm having some trouble with my tone completely disappearing in the mix when playing live with my band. I'm running direct into a soundboard (at home I run right into the pa speaker.) I DL'ed a preset that uses the PV Panama model which sounds fine on its own, but as soon as the full band comes in (keys, bass, drums, vocals), my guitar becomes practically inaudible and loses all cut/punch. What changes can I make that will help me come through? I put all of my settings below, but I am guessing there is probably just some EQ tweak that will help(I've tried adjusting mids). Just want you pros to have all the info. Any suggestions are appreciated! thx Helix Stomp XL Signal Path: Mod (Script Mod Phase) -> Amp (PV Panama) -> Cab -> Mod (Dynamix Flanger) -> Parametric EQ -> Delay (Ping Pong) -> Main L/R Mod 1 (Script Mod Phase - Mono): Rate: 1.9, Mix: 29%, Level: +1.0 dB Mod 2 (Dynamix Flanger - Stereo): Speed: 0.4, Control Select: Envelope, Depth: 6.6, Manual: 4.2, Mix: 16%, Phasing: -10.0, Recycle: In, CV Dynamics: 10.0, Max Delay: 10 ms, CV Tracking: Normal / Invert, Env Lag: 100 ms, Env Input: +70.0 dB, CV Decay: x2 Amp Settings (PV Panama): Drive: 2.6, Bass: 5.1, Mid: 6.0, Treble: 2.7, Presence: 9.0, Master: 4.0 Parametric EQ Settings (Post-Cab): Low Cut: 80 Hz, High Cut: 6.5 kHz, Mid Freq: 1.0 kHz (Mid Gain: +1.1 dB), High Freq: 3.8 kHz (High Gain: 0.0 dB), Level: 0.0 dB Delay (Ping Pong - Stereo): Time: 600 ms, Feedback: 40%, Scale: 50%, Spread: 10.0, Mix: 26%, Level: 0.0 dB, Low Cut: 100 Hz, High Cut: 8.9 kHz, Trails: On
×
×
  • Create New...