I followed the instructions in the previous post as well as the owners manual instructions on page 28 for setting minimum and maximum volume. I am using a Line 6 EX1 that I have used for several years on my POD HD500X in which I setup these parameters successfully. I must be missing something in the process. Here is what I have going on. The POD Go display shows the volume increasing in the range I programmed (30-100%) as I press the pedal but the volume increases instantly to 100% as I press the pedal down even when the read out shows the progression from the minimum to the maximum. Also, when I change between patches there is no minimum volume present until I move the pedal down then back up even though the readout shows the minimum volume that I have programmed into the POD Go. Any ideas?