I'm using the HX Effects with a Voodoo Lab Control Switcher to change the channels on a Dual Rectifier and it works great.
I have it set up as follows;
Footswitch 4: Amp Channel 1 (Modern)
Footswitch 5: Amp Channel 2 (Raw)
Footswitch 6: Amp Channel 3 (Clean)
The Footswitches act as you'd expect in this situation. If it's set to 'CC Toogle' with the mode set to 'Latch' instead of 'Moment'(Momentary), when Footswitch 4 is selected, the LED ring turns on and the Amp is set to Channel 1.
Now if I click Footswitch 6 for the Amp's Clean Channel, the Amp changes to Channel 3 correctly but now both Footswitch 4 and Footswitch 6 LED rings are on/lit.
If I use 'Midi CC' instead of 'CC Toggle' then the LED ring doesn't turn on at all (Midi CC doesn't have the option to select 'Latch' or 'Moment'(Momentary)).
What I want is when Footswitch 6 is activated, both Footswitch 4 and 5's LED rings are turned off so I can see which Amp Channel is active by looking at the HX Effects (instead of having to turn around and look at the amp).
My question is: is there a way to turn off other footswitch LED rings when a footswitch is selected? Or should I be using Snapshots for this?
The current setup works great because I have 3 Amp Channels across the bottom 3 HX Effects Footswitches all color coordinated to the AMP's Channels (Red, Orange & Green)
Cheers,
A
