Search the Community
Showing results for tags 'jtv-89f review variax'.
I just wanted to share some initial thoughts about my JTV-89F to those who already own one or those who might want to buy one. 2 weeks ago I received my JTV-89F in black and I've waited for it for 5 months. I've been playing it almost everyday since I received it. When I bought it I was looking for convenience and versatility as I play a lot of different genres and tuning. I play my guitars through my Fender Mustang III and guitar Rig 5 and I play everything form Buddy Holly, Clapton, Led Zappelin, Tears for fears, U2 to Zakk Wylde, Jason Becker or Dream Theater. I have a Gibson Les Paul Studio 2013 so most of my comparison is done based on this guitar. I will not extend too much just a brief recap of the guitar and the modeling sounds. The guitar itself seems a quality guitar compared to any Ibanez of LTD of a $800 range, there were a few flaws in the head stock painting, the black painting was over the maple sides, just a bit but it should have not happened. The graphtech bridge is well made keeps the guitar in tune if you know how to use it correctly. The guitar came with a good set up, about 3/64 of an inch in the low strings and there was minimal buzz in the 5th and 6th strings (also intonation was perfect), I don't like it that low any way so I raised the action to 5/64, this also good for the acoustic models as they'll sound better this way. After I raised the action I needed to adjust the bridge and intonation. One thing that surprised me was the quality of the rosewood fret board; it is so easy to do the bendings and to get harmonics out this thing. As for the quality in the construction of the electronic parts like the knobs battery, everything is OK. One thing that disappointed me were the mag P/U they do not sound good, too noisy, muddy and not defined, I had previously read that they were not so bad but the only thing that keeps me from putting them in the trash can is that Iâ€™m not that skilled to change the P/U in a variax, Iâ€™ve done it in some Epiphones but Iâ€™m afraid that doing the same in this guitar will not be that easy. Now letâ€™s go with the software. I never used workbench 1.9, I upgraded to 2.0 the day I received it. The graphic interface of WB HD is very nice and helpful; the installation of monkey and WB 2.0 took me about 2 hours to make everything work. Consider I have never used any of these programs before. I have the same bug like other with the P/Uâ€™s of the strat, hope line 6 fix this quick, it is not fair they are selling something people canâ€™t use. Now the heart of this thins, the modeling sounds. I bought this guitar mainly for the FR Graphtec Bridge, the modeling sounds and alternate tunings, the FR passed the test. Iâ€™ll tell you one thing and consider this very very well, regardless of the modeling sounds themselves it is very unfair and hard to give an opinion about the modeling guitars if you are not using the correct amp, PA or rig. The acoustic sound are a good example of this, any of the acoustic guitars or resonators will sound good in a normal amp, in my amp they sound like crap, you need a PA system or in my case I play them through Guitar Rig 5 using the acoustic preset and holy cow they sound so good, 100% credible. In a mix no one will notice the difference, theyâ€™re that good, even if you play them with some alternate tuning theyâ€™ll still sound very good, even the 12 string version sound credible. For the Lester sounds I use my Gibson Les Paul Studio as a comparison, the LP 58 modeled P/U feels a lot dirty, you cannot get a clean sound form it and when you put overdirve it feels too harsh. The middle position is OK and the Neck position is the best one, so good that beats the 490R in my Les Paul, clean or lead the modeled P/U is better, actually the neck P/Uâ€™s aof the Gibson modeled sound feel very good. The Tele sounds are OK, although I have never played a real one so I canâ€™t comment on that. The strat pickups are good, although for some reason Iâ€™m not getting a good sound in my mustang amp while in guitar rig the sound is almost like the real thing, I make comparisons with reviews of different strats in youtube and using guitar rig I can get a very similar sound to high quality strats. So thatâ€™s why I said that even if a modeling sounds seems to be not that good in an amp maybe in another amp it will sound good. The high gain modeling sounds are Ok and they definitely sound better than the mag P/Uâ€™s. very usable if you want to play Metallica or Dream theater although you wonâ€™t get the defined and compressed sound of a good pair of Dimarzios or EMGâ€™s. For Chime are mediocre I think they do not capture the essence of a real Rick, and among the semi and jazz models the outstanding model is the ES-335, with a VOX AC30 or Blues Jr. you could make wonders with that model. Thereâ€™s no latency in any of the models, nor static noise, which is a blessing or any other real flaw other than some of the models doesnâ€™t sound that good but overall Iâ€™m satisfied with the guitar but I they really want an outstanding guitar they need to put some decent mag P/Uâ€™s on it. So that is my review so far, I hope Line 6 keeps making improvements and they can add some guitar models for metal because almost everything is for jazz, rock or blues.