podymou Posted February 20, 2015 Share Posted February 20, 2015 Hi Folks, I used to connect the 500X to the L2t speaker via the Mixer Control Panel instrument inputs from the 500X feft and right XLR outs. I got a very nice sound. I was told that for best digital fidelity to connect the 500X to the System Control Panel L6 Link input to the 500K L6 Link output. I am using a 10ft XLR cable. What I have found is that I can no longer control the 500X volume and all other knob controls - also it doesn't sound good so I know I've messed something up. Would anyone know if I need to adjust any settings in the 500X? I see the number 1 light up next to the L6 Link if that helps to troubleshoot I have also ordered an AES/EBU cable to see if it makes a difference, but I was told that if I ran less than 10ft an XLR cable would work. I have attached the technical specs to the L2T - page three shows the Mixer Control and the System Control Panels Thank you for your help Quote Link to comment Share on other sites More sharing options...
maxnew40 Posted February 24, 2015 Share Posted February 24, 2015 Make sure you POD is set to Studio/Direct mode and also makes sure you are running the most recent POD firmware or the master volume may have no effect when connected via Link. -Max 2 Quote Link to comment Share on other sites More sharing options...
podymou Posted February 24, 2015 Author Share Posted February 24, 2015 Thank you Max! That did the trick! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.